Making an HDDClock - Step 11
|
|
Making an HDDClock - Step 11 |
|||||||||||||||||||||||||||||||||||
|
|
|
Mount the platters and separator rings to the spindle; use the original fastener if possible. Take care not to damage the read/write heads. If the actuator and/or carriage assembly were dismounted to remove the platters, replace them now. |
|
|||||||||||||||||||||||||||||||||
For more information on SRK Consulting products and services, please e-mail keszler@srkconsulting.com or phone +1-701-361-8406.
This page, and all contents, are Copyright © 1994 by SRK Consulting, Fargo, North Dakota, 58102. |
||||||||||||||||||||||||||||||||||||