Making an HDDClock - Step 5
|
|
Making an HDDClock - Step 5 |
||||||||||||||||||||||||||||||||||
|
|
|
Using a punch, from the back side, knock out the pin and spindle. Punch out the bearings and rings from the plate, then punch the pin from the spindle. Keep the spindle and plate, discard the rest. | |||||||||||||||||||||||||||||||||
For more information on SRK Consulting products and services, please e-mail keszler@srkconsulting.com or phone +1-701-361-8406.
This page, and all contents, are Copyright © 1994 by SRK Consulting, Fargo, North Dakota, 58102. |
|||||||||||||||||||||||||||||||||||